Microbrake 6000

Rollers

• Frame and panels manufactured from hot galvanised sheet metal.
• Test rollers covered with expanded mesh and a plastic coating containing quartz sand.
• Bearings and buffers are maintenance free.
• Rear test rollers raised by 35mm to avoid vehicle "climbing" out.

Display

• Data from an electronic strain-gauge measuring system.
• Accuracy to within +-1% of scale reading.
• Optional A4 colour printer and axle load weighing system.
• No maintenance of display unit and unaffected by heat and humidity.
• Braking force values displayed by two pointers so differences are immediately obvious.

Also….

• A pivoting wall-mounted version is available.
• An A4 printer with an integral dust-free drawer is available.
• Infra red remote control can be operated from the driver's seat.

Technical Specification

• Braking force measurement range: 0-6000 N
• Max. drive-over load: 4000 kg (8818 lb)
• Max. test load: 2500 kg (5511 Ib)
• Test speed: 5 km/h (3.1 mph)
• Motor rating: 3.7 kW (three-phase AC)
• Operating voltage: 3 x 230/400 V, 50 Hz
• Fuses: 3 x 25 A, slow-acting
• Roller dimensions: 205 mm dia.(8.07 in) x 700 mm (27.6 in) long
• Vehicle track, min/max: 800/2200 mm (31.5/86.6 in)
• Roller friction coefficient: 0.7 dry and wet
• Weight of rollers: 450 kg (992.07 lb)
• Paint finish: blue (RAL 501 5), black-grey (RAL 7016)

Make Enquiry